Go wireless with the Comfast wifi extender setup
In the modern era, Comfast wifi extenders have their own space in the telecommunication market. Likewise, these eliminate the dead spots at your place and speed up the network. So, if you buy a new repeater of the same brand, then the Comfast wifi extender setup is a must. This will help you to configure the networking device according to your preferences.
Further, you can carry out the configuration of this repeater using different ways. But before you go ahead with the Comfast wifi repeater setup, get ready with the necessary things, to begin with the procedure. So, if you need assistance with the detailed process of setting up your networking device, then must walk through this guide.
Prerequisites for the Comfast wifi range extender
Moreover, if you are going ahead to begin the setup process for your Comfast repeater, then must ensure to have the below-mentioned things with you:
Existing Router
Active internet connection
Web/IP Address
Valid Admin details
Computer/Laptop
Ethernet cables
How to execute the Comfast wifi extender setup procedure?
Furthermore, it is necessary to configure the extender to set it according to your preferences. Likewise, there are two different methods to carry out the Comfast wifi range extender configuration as discussed above.
The first one is using the web address and the second is through the WPS button. So, if you want to know the detailed steps for each procedure, then stay tuned to this section:
Comfast wifi extender setup using the web GUI
- To begin with, ensure your router is placed closer to the router.
- Next, connect the computer to the Comfast extender.
- Now, open the web browser and type ap.setup web or 192.168.10.1 IP address in the browser bar.
- After that, mentioning the valid username and password on the login window prompted you.
- Here, you reach the smart Setup wizard of the Comfast extender.
- Again, go to the Wireless Settings and edit the SSID name and WPA/WPA2 PSK>Pre Shared Key fields to modify the network name and password.
- Further, enter the desired network name in the SSID section and the complex password in the Pre Shared Key option.
- Further, visit the other sections to modify the Advanced settings and follow the on-screen instructions to complete the process.
- At last, you are done with the Comfast repeater configuration.
Configuring the Comfast repeater via the WPS button
- Initially, check that the router and extender are placed in the same room or near each other.
- Now, locate the WPS button on your router and next on the extender.
- Similarly, press and hold the WPS knob on the router and then on the repeater simultaneously within 2 minutes.
- Hereon, wait till the LED on the range booster starts blinking blue.
- Again, release the WPS buttons on the router and extender.
- Further, access the admin panel of the Comfast range extender on your computer using the web address method.
- After that change the network name and password for the security concerns on the Setup dashboard.
- Here, you can configure the Advanced settings too, such as Bridge Mode, AP mode, Guest Network, and more by following the on-screen guidelines.
- Lastly, click on Save/Apply to secure the changes you made recently.
Why is the Comfast wifi extender not working after setting up? How to fix it?
Generally, the procedure for setting up the range booster is an easy process. But for non-techies and new users, this may somehow be complex. Therefore, they face the Comfast wifi extender not working when they configure their networking device for the first time.
This may happen due to an unstable network, not saving the changes or improper configuration, the extender being out of the router’s network range, incorrect login details, etc. Hence, it is necessary to resolve these issues to complete the Comfast wifi extender setup. So, we share some easy tips to fix these issues, have a look beneath:
- Initially, ensure a sufficient power supply to the range extender and the router.
- Confirm that you enter the accurate web/IP and admin details while accessing the login page of the range booster.
- Next, disable the security software like VPN/Antivirus/Firewall, etc. for the time being and re-enable them after completing the procedure.
- Make sure the range extender is placed within the router’s network range or closer to the router.
- Eliminate the signal interferences around the networking devices, such as EMV devices, mirrors, furniture, etc.
- Reboot the extender to get rid of the technical glitches and bugs. For this, unplug the router, extender, computer, and then modem for 30 seconds. Wait patiently for 30 seconds and plug back the devices.
- Remove the unnecessary browser data from the web browser and update it as needed. Also, shift to another browser if it does not support the given web address.
- Stabilize the internet connection by using the ethernet cables.
- If there are frequent network drop-offs or no internet on the extender, then contact your ISP authority.
- Check that the cable connections are tightened enough and that these are not damaged/tangled.
- Ensure that the computer/laptop you use to configure the extender is compatible with them.
- If the window prompts for the firmware update of the repeater, then proceed with the on-screen instructions to complete the procedure or reach us!
- If nothing else works, then factory reset the networking device. Keep in mind this will revert your range extender to its default settings and you have to reconfigure it from scratch.
How to Comfast wifi repeater change password procedure can be done?
Additionally, a password change is an essential step while you login or configure the settings of your range extender. This will help to secure your extender network and confidential data on the linked devices. So, if you want to know the comfast wifi repeater change password process, then must follow the steps mentioned below:
- First and foremost, access the admin interface of the range extender by using the ap.setup web or 192.168.10.1 IP address and valid admin details.
- Now, you land on the Setup wizard of the repeater.
- Here, go to the Wireless Settings and the SSID name and WPA/WPA2 PSK>Pre Shared Key fields.
- Further, edit both the fields and type in the unique name in the SSID section and a complex password under the Pre-Shared Key option.
- Finally, tap on the Save/Apply option to implement the recent settings.
All things considered, you dig deeper into the Comfast wifi extender setup process here and other relevant info. Still, seeking more help? Reach us!
Frequently Asked Questions
How to reset the Comfast range extender?
For this, locate and press the Reset button on the repeater and hold it for 10 seconds. Now, release this knob, and your networking device gets back to its default settings.
Why do we use the WPS button on the repeater?
This allows the direct pairing of the router and extender to the network.
How to set the 2.4GHz network on my Comfast extender?
For this, access the admin panel of the range extender and go to the Wireless Settings. Here, click on the Wireless Network/Network settings and enable the 2.4GHz bandwidth.